Components - Graficon Maschinenbau AG
23723
page-template-default,page,page-id-23723,cookies-not-set,ajax_updown_fade,page_not_loaded,,select-theme-ver-3.8.1,wpb-js-composer js-comp-ver-5.1.1,vc_responsive
Components

Graficon‘s components cover a broad spectrum of print, processing and finishing technologies for the labelling and packaging industry. Sheet cutters, booklet solutions, digital print, screenprinting units and accessories all flow into solutions for expanding and complementing your existing machinery.

Screenprinting unit

Graficon‘s screenprinting unit can be integrated in Graficon and Bobst Firenze machines. This gives you the opportunity to retrofit your machines to print multi-process labels. The unit can be installed in the flexo-head with a transport trolley and connected with the machine simply by one compressed air hose.

Machine-systems: Ilma, uniQ, Bobst Firenze

Accepts stencil-material: TEC SCREEN (Kocher&Beck), SCREENY (Gallus), ROTAPLATE (Stork)

More Infos!
Stencil welding unit

With Graficon‘s stencil welding unit, you can convert the exposed stencil from sheet into a cylinder yourself, providing you with a more flexible production. The stencil welding unit can be used with standard stencil-materials and most machine systems.

Machine-systems: Graficon, Ilma, uniQ, Bobst Firenze, Gallus, Arsoma, Stork

Accepts stencil-material: TEC SCREEN (Kocher&Beck), SCREENY (Gallus), ROTAPLATE (Stork)

More Infos!
Format cutting unit

With Graficon’s format cutting unit you can accurately cut the stencil material from the roll to the sheet in the required format width and length. This makes your production independent and flexible. The format cutting unit can cut all standard stencil materials.

Machine-systems: Graficon, Ilma, uniQ, Bobst Firenze, Gallus, Arsoma, Stork

Accepts stencil-material: TEC SCREEN (Kocher&Beck), SCREENY (Gallus), ROTAPLATE (Stork)

More Infos!
Stencil mounting unit

With Graficon‘s stencil mounting unit, you can easy, fast and accurately fix the end-rings to the welded stencil and at the same time precisely align the two gears to each other. The stencil mounting unit can accept standard stencil materials.

Machine-systems: Graficon, Ilma, uniQ, Bobst Firenze, Gallus, Arsoma, Stork

Accepts stencil-material: TEC SCREEN (Kocher&Beck), SCREENY (Gallus), ROTAPLATE (Stork)

More Infos!
Hole punching unit

With Graficon‘s hole punching unit, you can punch the register-holes in the stencil yourself, providing you with a more flexible production. The punching unit can be used with standard stencil-materials and machine systems.

Machine-systems: Graficon, Ilma, uniQ, Bobst Firenze, Gallus, Arsoma, Stork

Accepts stencil-material: TEC SCREEN (Kocher&Beck), SCREENY (Gallus), ROTAPLATE (Stork)

More Infos!
Screen Cleaner

With Graficon’s Screen-Cleaner you can wash-out the ink and clean the rotary-screen stencils inside and outside after printing is completed. This allows you to store the stencils properly and clean, ready to be used again.

More Infos!
Segment die cutting unit Graficon

• Easy and fast tool change
• Servo drive
• Micro-register adjustment
• Speed 5000 I/h / approx. 30 m/min
• upgrade available up to 8000 I/h / approx. 50 m/min
• Die-cutting length 12” / 304.8 mm
• upgrade available up to 15” / 381.0 mm
• Die-cutting width 330 mm / 450 mm

Watch Video!
Booklet section to Gallus R 160/R 200

The booklet section from Grafi con can be integrated in a label-printing machine type Gallus R 160 or R 200. All units are mounted on an intermediate frame of 2200 mm length and are completely wired. The frame will be installed between the print section and the fl atbed die-cutting unit, respectively the processing section.

Varnish unit to Gallus T180/T200

The varnish unit can be integrated in the T180 / T200 between the web transport unit and the rewinder. It has its own drive-system, using a servo-motor. Two NIP-Roller systems are incorporated, to guarantee a constant and accurate web-tension.

Electronic feed unit to Gallus T180/T200

The electronic feed unit will be mounted in place of the present gripper feed. It is especially suitable for the register transport of unstable materials like PE-, PP-, Polyester-, PVC-foils etc.

Laminating unit 220 mm T180

The laminating unit is used to apply a self adhesive material to a printed web in a T 180 B/S. The unwind unit is equipped with a pneumatic brake. A horizontal dancer controls and regulates the uneven tension between the unwind, web movement and rewinding of the silicon paper. The silicon rewind unit is driven by an electric motor.

Graficon Booklet-Teil R200

Der Booklet-Teil von Graficon kann in eine Etiketten-Druckmaschine vom Typ Gallus R 160 oder R 200 integriert werden. Alle Einheiten sind auf einem Zwischenständer von 2200 mm Länge montiert und komplett verdrahtet. Der Ständer wird zwischen dem Druckteil und der Flachstanze respektive dem Bearbeitungs-Teil eingebaut.

Lackiereinheit zu Gallus T180 / T200

Dieses Lackierwerk wird zwischen Auslaufteil der Druckmaschine und Aufwickeleinheit installiert. Es wird von einem Servomotor…

Elektronischer Vorschub Graficon T180/200

Der elektronische Vorschub wird anstelle des jetzt montierten Zangenvorschubes aufgebaut.

Laminiereinheit Graficon T180/200

Mit der Laminiereinheit wird eine selbstklebende, transparente Folie auf die vorbedruckte Etikettenbahn einer Gallus…